WC67K-40T 2500 CNC hydraulic plate bending machine price,press brake bending machine price

Introduction of the hydraulic press brake and bending machine:

Totally EU streamlined design,Mono block by welding robots & aparatus and stress relief process by Annealing treatment.

2.Hydraulic synchronised positive stop design,and by Etsun NC programmable controller assuring accurate repeatability &ease of use.

3.Integrated hydraulic system(Bosch-Rexroth form Germany)allowing rapid approach switching automatically to slow bend.

4.Inverter with E21 NC System operated back gauge with quality support fingers also with vertical adjustment

5.Inch, single mode being designed for the machine,reversing and maintain time can be controlled by the time relays.

6.Safe fence and the electric inter locker have been designed for the machine to ensure the operation safety.

Main Features:

1.Totally EU streamlined design,Monoblock by welding robots & aparatus and stress relief process by Annealing treatment.
2.All machines are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel with the latest technology.
3. MB8 Series are among the highest rated machines which will help you increase your productivity and keep costs at minimum levelwith its user friendly CNC controller and low cost hydraulic maintenance.
4. High quality and repetitive bending is obtained by using synchronized cylinders and valves.
5. Automatic axis referencing and calibrating when machine is turned on.

6. Rigid upper beam runs on 8-point bearings with bending precision of 0.01 mm
7. Well-known top and bottom tool brands are long lasting stiffened and provide precise bending.Silent high pressure pump.

Standard Equipment:
1. 4- axis Delem DA52s programming mode CNC control
2. Full synchronisation of Y1 + Y2 axes with proportional hydraulic valve system and constant monitoring by CNC system to +/- 0.01mm accuracy
3. High precision linear scales for measurement of stroke depth mounted on side frames rather than top beam to prevent any distortion in accuracy as beam comes under load
4. CNC-controlled X & R-axis as standard ballscrew backgauge with servo drive motors.
5. Light guards

6. Two micrometric backgauge finger-stops with lateral adjustment

7. Steel mono-block construction

8. Polished chrome plated and ground cylinders
9. Long stroke and large open height dimensions
10. High approach and return speeds for production bending.
11. Euro style quick release top tool holders with intermediaries including wedges for crowning.
12. 88 degree sectionalised goose neck top tool

13. 4 way sectionalised multi vee bottom tool

14. Double footswitch control and pendant type control arm.

15. Electrically interlocked side guards

16. Electrically interlocked read access door

17. 2 sliding front support arms with linear guide rails for lateral adjustment and hand wheel for height adjustment, 1000mm long from centre of bottom tool vee.

18. Side guard is standard meeting CE regulations.

Delem DA52s CNC Press Brake Control system:
1. 6,4” VGA colour LCD (TFT)
2. Numerical, one page programming
3. Quick, one-page programming
4. Up to 4 axes (Y1, Y2, and 2 auxiliary axes)
5. CNC Crowning control
6. USB, peripheral interfacing
7. Tool/material/product library
8. Servo, frequency inverter and AC control for backgauge axes.

The best bending results You can bend longer and deeper parts with standard ZC Seires Series.

utyr Excellent Original manufacturer for press brake, shearing machine, tools and blade from China.